About AnonyMouse

image: AnonyMouse's picture
Recent content
TitleUpdated
Windmill motor - 1ph, 220V14 Apr 16
VFD for a Windmill?14 Apr 16
Sanderson's type recovered from the River Thames20 Feb 15
CAD drawings of hard to find chases5 Mar 14
Missing page in the common 10x15 parts book13 Feb 14
Windmill register spindle - binding 26 Jul 13
Recent comments
Title ↑Date
(going from memory...) The lay system...5 Mar
. 14 Jul
1) I'd use a belt the same size as...29 Mar
>>"I have looked and studied the press...7 Nov
@enriquevw, Methodically, I'd try to...27 May
A bit of post-it tape on the tympan...12 Sep
A couple of thoughts... I'd try a...26 Oct
A couple of thoughts: If the bite is...7 Sep
A good washup blade on a windmill...22 May
A pair of 4x4s or 6x6s are pretty good;...29 Jan
A possible resource for advice is Jim...31 Jul
A tabletop press should not take more...31 May
A variable-speed C&P is easy to learn...25 Apr
A windmill is a great machine when you...9 Mar
A windmill is not exactly a press for...25 Sep
A windmill is not the best choice for...19 Mar
About 4pt total adjustment, so 2pt in...13 Mar
Acetone is overkill. Naptha/Coleman is...23 Oct
After cleaning the threads with a brass...22 Oct
Agree with above comments. I...10 Apr
Also check youtube.com for "illustrator...19 Oct
Also, are the bearings in the trucks...17 Dec
Also, I'd look at this bolt on the link...23 Jan
Also, there is supposed to be a thrust...30 Sep
An additional test perhaps... switch...15 Aug
An imperceptible bend can cause the...8 Feb
Another...28 Mar
Another method of bending with...5 Aug
Any extra suckers open?16 Feb
Anyone who goes to the national...22 Oct
Are the impression settings the same as...8 Feb
Are the rails and trucks clean and free...17 Dec
Are those metal shavings on cog? Where...19 May
Are you spinning the flywheel by hand...16 Jul
Are you spinning the flywheel by hand...16 Jul
As a test, I'd see if it stops even...16 Feb
As Dick says, the small stock guide...2 Apr
As early as: Inland Printer...4 Feb
As I recall, the adjustment screws are...4 Aug
As I understand it, if the trucks &...3 Jun