About Arie Koelewyn

image: Arie Koelewyn's picture
Recent content
TitleUpdated
Hammond Glider motor12 May 17
Old Ink30 Jul 14
Johnson Type Foundry Philadelphia24 Jan 13
The Paper Airplane Press21 Oct 10
National Amateur Press Association21 Nov 06
Recent comments
TitleDate ↓
These are all popular presses. I'd be...4 Nov
The gasket material I use is a mixture...28 Sep
Gasket material, sheets of craft foam...28 Sep
ATF 525 is Bernhard Gothic...7 Jun
Thanks, John. One more question: rubber...28 Feb
John: Was the rubber sheet in...27 Feb
Mike: Can't help you directly, but in...12 Feb
Not in Ontario (in Michigan) and loathe...1 Jan
OK. Turns out this motor is not the...16 Jun
Usable furniture can be made with a...15 Jun
Shimming the linoleum cut up to type...15 Jun
If I understand it right, CMYK color...15 Jun
Can't help you too much on rail...7 Jun
Thanks everyone. This saw has a 110...12 May
Thomas is correct, of course. I have a...3 Apr
192526 Mar
No Longer Lost: Some years ago I had...5 Mar
Upper left corner of the bed, under the...8 Feb
John: The hole in the back of the...6 Feb
John: The counter rotating ink...5 Feb
Nicholas7768: The shaft is 3/4" in...1 Dec
What size image and what press are you...29 Nov
A simple J shaped hook like one of the...29 Nov
When I get a plate made, I use wood...3 Nov
Crisco followed up with a detergent (to...3 Nov
I have a working ink table like this...3 Nov
Not a terrible idea for the press. The...30 Oct
If the press has an offet in the...29 Sep
...23 Aug
Lammy: Nope. Slivers of glass in the...1 Jul
Just stick it in a press and see what...1 Jul
I'd bet you are inking the shoulders of...21 Jun
Yes. That's the normal way to use this...20 Jun
I've got an identical #1. Can't see...18 Jun
Nope. 1907. The C indicates a 10x15...29 May
An 8x12 OS only weighs a bit more than...30 Apr
I've seen it done well once. I believe...6 Apr
Yes, that's it.29 Feb
It's not a C&P. No internal frame, the...26 Feb
The bottom bolts come off just like the...24 Dec