About linegauge

Recent content

Title	Updated
Aluminum and resalite furniture	17 Apr 20
Anyone need a few Ludlows and a ton of mats?	28 Feb 18
Schmidt Graphic Equipment, Inc.	10 Nov 14
Dried and stubborn ink remover	14 Mar 11
Watch the classified ads	26 May 10
Furniture	5 May 09
Backup plates?	5 May 09

Recent comments

Title	Date ↑
There are two tools that are used in...	23 Mar
Get the platen about 4" from the...	23 Mar
Look in you operator's manual. There is...	30 Mar
I am an independent Heidelberg...	10 Apr
Forgot: Don't worry about the air...	10 Apr
Can't see for sure, is the handle on...	10 Apr
See if there is someone that does dry...	10 Apr
What type of ink are you all using? I...	14 Apr
The truck diameter looks to be larger...	15 Apr
It also appears that the rollers are...	15 Apr
Boxcar Press has an excellent video on...	15 Apr
I am a service man for both machines. A...	1 May
They are .890" without plates. Several...	11 May
Check and see what type of joists are...	21 May
Try Unisource or any paper house in...	21 May
Check that there are no loose bearings...	2 Jun
You may have "composition" rollers....	2 Jun
Hope too much info is a good thing....	9 Jul
Parts can be obtained from Whttenburg...	13 Jul
1. Back out both adjusting screws about...	29 Jul
With the platen back as for loading...	31 Jul
Email me and I will forward a series of...	9 Dec
It is very possible that at some time...	16 Dec
Why not just use the lay gauges as they...	23 Dec
Email me. I am an independent service...	19 Jan
How many units on the machine? What...	21 Jan
OK saw the video. are you sure your...	24 Jan
I repaired a machine recently with the...	22 Feb
Grainger has motors that will match up....	6 Mar
A 1/2 or 3/4 HP motor will definitely...	6 Mar
Take the top off of the tank and see if...	6 Apr
Depending on the slope, I install...	13 Apr
Contact Boxcar Press at...	13 Apr
Check the information plate on the...	3 Jun
What are the dimensions? I may have...	3 Jun
Enough already. Alan is doing what he...	17 Jun
There is a product called MicroCut. It...	29 Jun
Is this an "L" shaped rectangular pin...	30 Jul
Post a photo. I don't recall any...	25 Aug
Is it going into the grippers crooked...	14 Sep