About Hugo

image: Hugo's picture
Recent content
TitleUpdated
C&P Type Saddle Spring Compression17 Aug 14
C&P Platen Installation Mistake1 Jul 13
Guillotine Paper Cutter25 Feb 13
Heidelberg Platen More Lube Points2 Jul 12
Heidelberg Platen3 Jun 12
C&P Ink Roller Redesign17 May 11
C&P Maingear/Pinion Misalignment9 Dec 09
C&P Ink Disk Surface Worry14 Nov 09
Original Motor for C&P 12x1819 Oct 09
Press Choice for Artwork10 Aug 09
Recent comments
TitleDate ↓
While your immediate issue has been...19 Apr
If you are considering re-using the...30 Sep
Thanks guys! Once I figured out that...18 Aug
My red ball (1964) was running in a...17 Aug
You might also be interested in this...17 Aug
I just posted a method for compressing...17 Aug
Tried electrical tape, tried gorilla...19 Jun
To to add a little trivia to the 3D...30 May
Fritz, Congratulations, you know the...30 May
There are customs classifications (or...10 Mar
A couple of points to think about. The...6 Mar
Careful with gear reducer drives on our...9 Jul
Luke, my press is a 12x18 New Style...9 Jul
I believe the white residue is from...8 Jul
Intermediate Progress Report: Due to my...8 Jul
I would suggest turning the press over...30 Jun
Yes thanks for the additional comment...21 Mar
Here is my take, I thought about it...2 Mar
yamski, I've looked at your post a...27 Feb
Thanks for those comments! Bob, I'm...26 Feb
This is so wrong on so many levels that...18 Nov
Moved my C&P 12x18 from Seattle to...16 Nov
Ok, now that I have been able to turn...11 Aug
Here is what I did with my 12 x...7 Jul
Likely too late for your job, but I...7 Jul
Peter, Sorry for the long interval...7 Jul
Alan, Those comments come from two...2 Jul
Caleb, It's been a while since I...3 Jun
My press, a1964 red ball, came out of a...3 Jun
Thanks for those comments! Yes, I'm...3 Jun
A couple of points on the wiring (the...18 Mar
Does this info...24 Aug
Aside from the voltage rating having to...14 Jun
The roller on the left, which controls...14 Jun
Thanks everyone for your insight and...14 Jun
This is obviously too late for your...9 Apr
A question for everyone who commented...31 Dec
Ok, I was able to persuade the key out....10 Dec
Yes the top face of the key has marks...9 Dec
I am also looking at the way to best...5 Dec