About winking cat press

image: winking cat press's picture
Recent content
TitleUpdated
Ideas needed for Trip Mechanism 28 Aug 18
The Small Press is FINISHED!23 Aug 18
progress on the little press (& pics!)6 Aug 18
a sneek peek at the new small press project26 Jul 18
a sneek peek at the small press project26 Jul 18
Info needed for New Small Press Project24 Jul 18
weren't we talking about Ortho Lith film the...18 Dec 17
Rescued fron a Junk Shop!6 Sep 17
The Winking Cat Cylinder / Etching Pressames6 Sep 17
Taping Rails on a 3x56 Sep 17
Recent comments
TitleDate ↓
ok... Just when we all thought we'd...24 Jun
While I have not converted a mangle...12 Feb
Thanks for the good words. Since those...14 Dec
Emco does indeed make good lathes, both...27 Nov
the best machinist I know is a guy...22 Nov
Listing my failures would read like a...22 Nov
I've had a lathe in my shop ever since...21 Nov
ReedH.... I've done a lot of laser-cut...1 Oct
I do that sort of printing all the...28 Sep
there is one correction to be made:...12 Sep
.... and if you are wondering how a...11 Sep
all.... I have not forgotten about this...11 Sep
That's not a bad idea at all. I could...11 Sep
All- Excellent ideas, comments, and...1 Sep
Great comments across the board!...30 Aug
All- thanks for the ideas, and input!...29 Aug
Steve.... I did calculate the cost to...26 Aug
the 50T hydraulic press certainly looks...24 Aug
I like the idea of 24x36.. let's look...24 Aug
All.... thanks for the good words. I...24 Aug
Actually, quite a few artists use...23 Aug
daleraby said : "Now, should some...22 Aug
Hello Matt.... the impression size was...15 Aug
Dining Rooms are waaaay over-rated! 12 Aug
Hello Dado.... Typically these were cut...10 Aug
Hello ALL.... thanks for the input and...10 Aug
galen... that's an interesting design....7 Aug
I'm with Gachap on this one. I don't...4 Aug
I've made a number of aluminum trucks...4 Aug
Kimaboe- yes, my press is going to...27 Jul
That is a good question, and an...26 Jul
Below is a picture of a "Little Joe"...26 Jul
Geoffrey- your idea is certainly worth...25 Jul
I don't know about using the metal in a...24 Jul
Yep.... I'm with you fellas! It looks...23 Jul
ok..... one would think that after a...16 Jul
then again.... here is a link to a...11 Jul
I'm not certain what the gantry is for...11 Jul
I'm sorry to hear that about Fritz. He...9 Jul
"What about someone who doesn’t have...9 Jul