About Ink Spot

image: Ink Spot's picture
  • Member for 9 years 1 day.
  • Last access 3 hours 41 minutes ago.
Recent content
TitleUpdated
Craftsmen Monarch 9 X 12 Table Top Press11 Oct 17
Chase lock 13 Jan 16
Dave Churchman30 Dec 15
Daughaday14 Apr 15
Press ID Please27 Aug 12
T and T Press Restoration18 Aug 12
Padgett Any Angle Furniture1 Jun 12
Press Blanket28 Oct 11
C & P molds7 Mar 11
Golding Map Press22 Jan 11
Recent comments
TitleDate ↓
It looks like a Sigwalt Chicago #1121 Oct
Pairofcrows, Should you acquire the...22 Jul
I would like to add an additional...14 Jun
Here are the photos of the O.S. Pilot...15 May
To all who are interested in our table...11 May
Huxley Verticle 9 May
We have more than one Pilot rocker in...5 May
Nick, From your photos and description...29 Apr
peminist, Please contact us: T...25 Apr
We replicated this Pawl last winter....30 Mar
jeremiahjtaylor, Please contact us...8 Feb
HeidiRenee, The set screws can be...8 Feb
Jeremiah, Please contact us...21 Jan
We have repaired many broken Pilot...31 Aug
Still Have Hair... Adjusting a platen...19 Jul
Susan, I while back we had...27 May
This sounds all to familiar! Happen...14 May
Steveprint It looks like a...1 May
You can obtain the required L/H...16 Mar
Susan, The roller saddles are correct...25 Feb
Sugar Pear Design. Locate the set...2 Feb
Hello iwillcreate, Brazing the...10 Jan
Posting on FB was by Nils R Bull Young30 Dec
Hello cassielaine, Have you...25 Nov
The Pilot gripper bar spring is wound...2 Oct
This part can be repaired. If you are...29 Aug
One can drill another hole in the shaft...21 Jul
Martinai, It would be our pleasure to...26 Jun
After the parts have been prepared for...23 Jun
The broken spring the seller is...20 Jun
Phogan, First Press is a 6 x 10...6 Jun
John, Your platen adjusting gauge is...30 May
Please support the...19 May
Just felt the need to bring this to the...6 May
Supported! Great start to the...27 Apr
Ask for a length of music wire that...10 Apr
Chuck, Yes, we can repair the part...29 Mar
Chuck Remove the broken part and...28 Mar
Nancy, Go to a good, well stocked...19 Feb
The approximate weight of the Craftsmen...11 Feb