About jfitz

image: jfitz's picture
  • Jim Fitzgerald
  • (3) 10x15 Heidelberg Platen (1 w/foil), 12x18 Windmill with side pull foil, Miehle v50x, C&P 12x18 w/Kluge feeder, C&P 8x12 handfeed OS, 12x18 Kluge diecutter with foil
  • United States
  • cedarparkprinting.com
Recent content
TitleUpdated
Kluge "N" Series Pump Rebuild20 Sep 19
Help needed from owner of 12x18 C&P with Kluge...18 May 19
Recommendations for "Kiss Cut" label stock6 Nov 18
Fit & Registration Vs. Speed19 Mar 17
Leibinger #13 Numbering Machine Help11 Jan 17
I told myself I wouldn't do this....1 Dec 16
Heidelberg Cake13 Nov 16
Modifying an embossing die?8 Sep 16
12 x 18 C&P register parts needed9 Jul 16
12 x 18 C&P Swing Away Gripper Bar9 Jul 16
Recent comments
TitleDate ↓
I received the parts from Crawford...13 Oct
PARTS ARE AVAILABLE!!!! Crawford...25 Sep
I believe I have found a source for...24 Sep
The pump I believe has leather cups20 Sep
Doug- The measurements I have...5 Aug
ericm- Yes, I did receive them. Thank...21 May
ericm, I look forward to seeing...18 May
lakeeriedesignco- Here is a link that...8 Apr
nico- I have foiled on both Kluge and...12 Jan
I have used acrylic nail powder with...6 Jan
Ski- Try: Jack Beall Vertical...5 Nov
mnreggie - Check your idler rollers. I...9 Sep
This is a great get together for anyone...8 Sep
Double Post, Sorry.8 Sep
western411- You should contact your...9 May
Sounds fantastic. Do you have a...6 Sep
Thank you all for the...25 Mar
I may have to go the phone route...1 Dec
enriquevw- I have a unit from...24 Oct
enriquevw- You might try Fritz at N.A....23 Oct
Here is the information I received from...29 Mar
I did hear that Ernie's wife was pretty...28 Mar
Hopefully Ernie is just taking a break...28 Mar
I have used acrylic nail powder with...17 Mar
Here is a reply I received from a...29 Feb
GWAK- I did try that and it was too...27 Feb
Thank you for the reply's. Sounds...11 Feb
I spoke with him on the phone last week...28 Jan
Daniel- I usually just would pull...24 Jan
We are closed for the holidays. So I...23 Dec
houston- 150 DPI will work if the...24 Nov
Rick- I am trying to get work all...11 Sep
Rachel- Aaron is right, they can be...3 Sep
Dick- Do you know who makes the tool?8 Jul
2727- I am not even sure that my parts...27 Feb
UPDATE- It seams to have gone away...8 Jan
Kimburks- I have used electrical tape...6 Jan
I cleaned the flapper valve and put on...22 Nov
Rubicon- I looked at a couple of the...21 Nov
I will be checking things out this...21 Nov