About pdan

image: pdan's picture
  • Member for 9 years 17 weeks.
  • Last access 3 weeks 17 hours ago.
Recent content
TitleUpdated
This Old Kluge28 May 20
Backside ghosting while Foiling5 Aug 17
Recent comments
TitleDate ↓
dupe14 May
dupe14 May
dupe14 May
I've given up on the locating pins. I...14 May
I don't get to spend the companies...12 May
We put Bigfoot suckers on a vintage...1 Mar
I can't comment on the glue but it has...21 Feb
Your first post is for the oil fittings.8 Feb
Guesstimate one time. From that...8 Feb
We have a Gold Boss foil attachment on...22 Jan
We've had a piece of phenolic board...31 Dec
I'll look at my rig tomorrow but if...30 Dec
I've used franks method many...11 Sep
...7 May
I think kittyj is using nickle...2 Apr
Repeating what has been posted but...5 Mar
You have very little to worry about....12 Jan
Card stock cut to about 3P x 10P taped...9 Jan
Sent pm. I live close by and travel...18 Oct
Two caveats to cloth With practice...24 Mar
That top layer of ink has skinned over...21 Mar
I've done plenty of die cutting on a...18 Jan
Run less ink or drop a slip sheet after...8 Nov
I would consider that a normal fit for...4 Oct
Repeat this phrase: "Pack adds...19 Aug
140# is the heaviest you'll see common...21 Feb
Did you get that solved? I'd look...13 Jan
Huh?21 Dec
You can substitute different materials...22 Nov
Not normal. Are we discussing a...15 Oct
The air & vacuum pump sits at the back...4 Aug
Speed can equate to dwell time of...2 Apr
I've been watching this thread since it...2 Apr
Clean everything and if you can run...24 Jan
Ran some infinity on the windmill...9 Dec
@western - I've got two sided tape at...2 Sep
Getting back to the original post. The...20 Aug
I never new the name of the stuff or...18 Aug
Depends on the "plastic". We offset on...4 Apr
The norm at my new employer is one to...19 Dec