About Frank Underwood

Recent content

Title	Updated
Pay Pal	7 Nov 15

Recent comments

Title ↓	Date
"Whereabouts in Ohio this equipment is...	23 Nov
You shouldn't have a form much above...	18 Aug
You should download the "Heidelberg...	11 Feb
You might try metallic powder dusting...	27 Oct
You do not state whether this is...	26 Apr
You do not say just what kind of press...	28 Apr
You do not say just what kind of press...	28 Apr
Yep, these little suckers jump or slip...	3 Sep
Yep, it's for High-Speeds. Hempel-style...	1 Jul
Yep, it's for High-Speeds. Hempel-style...	1 Jul
Without seeing this press, it's hard to...	24 May
We used to use a piece of oiled paper...	24 Mar
Vey interesting, Fritz. I always...	10 May
U.S.standard usually was 3A, 4A, 5A...	30 Jan
Type suppliers ordinarily stock...	14 Mar
Try building it up with automotive body...	19 Jan
Top part is for sharpening saw blade...	16 Sep
This sounds to me as though one or more...	13 Oct
This is Ancient History, but issues...	4 Dec
This demonstrates the value of...	20 Nov
This could also be due to the lip on...	30 Jan
Third one's Jenson; fourth one's...	13 Feb
They're just ordinary short brads. If...	22 Aug
They put taper pins in dry ice to...	7 Apr
There's virtually no difference between...	10 Dec
There must be about 10,000 wood type...	28 Jan
There don't seem to be any bolt holes...	7 Aug
The "collar" on the right is not...	25 Sep
The whole purpose of the rawhide is to...	26 Jul
The strip that fits into the slot under...	18 Mar
The powdered resin causes the lock...	18 Aug
The gear ratios of C&P presses are:...	22 Dec
The clutch and brake are one thing; if...	2 May
...	25 May
That an Original Heidelberg chase for...	25 Aug
Take it! This one is from 1955, or...	19 Oct
Something like a cut-down bed on a...	10 Jul
Schwabacher is the German language...	30 Jul
Rust bucket, Unknown if it will feed...	15 Dec
Right! Naval Jelly should not be...	19 Mar