About inky

image: inky's picture
Recent content
TitleUpdated
Copper and brass spaces19 Aug 17
Tutor/mentor7 Aug 17
Makeready5 Apr 17
Reference30 Mar 17
Christmas/Chanukah cards30 Nov 15
The term chapel2 Jul 15
Holiday cards16 Oct 14
Hand set type30 Sep 14
Current spam25 May 13
Terminology1 Dec 12
Recent comments
TitleDate ↓
In your first post you said that the...25 Sep
The objective is to return the...25 Sep
You are thinking like the press. The...24 Sep
Could the rails be uneven? Well...24 Sep
24 Sep
Could the rails be uneven? Well...24 Sep
dickg, a regular on this forum and a...24 Sep
Simple machine. Intended to make a...8 Sep
MBO Manage by Objective What...8 Sep
I have not been here with water based...6 Sep
C & P does not prescribe grease for any...3 Sep
Type cases were assembled in jigs which...2 Sep
For years most of us thought the white...31 Aug
I suggest leaving the press on the 2 x...30 Aug
You may be able to salvage the type...18 Aug
I will stick with my first suggestion...17 Aug
Your proposed solution is doable, but...17 Aug
Two inch. I try to keep the load on...10 Aug
If all is nice and flat and hard...9 Aug
Steel is too expensive and is overkill....22 Jul
removed21 Jul
jhenry probably has it. Todd's Press...21 Jul
You speak of new rollers. Did you...20 Jul
Analyze, improvise, overcome. Help the...12 Jul
I teach my students that you have to...12 Jul
Many do use lamp oil/kerosene as their...7 Jul
Turpentine and mineral spirit are both...6 Jul
Back removal. You won't know until you...6 Jul
Yes, mineral spirit is called white...6 Jul
Well, yes. Alcohol is OK and works well...6 Jul
I do a lot of this. First I vacuum or...6 Jul
Rails are cast iron. Trucks are steel....7 Jun
You done good. I do a lot of this. I...22 May
Some of us refer to the white stuff as...17 May
Unless something is bent, broken...17 May
Have you ever had the pleasure of new...16 May
Congratulations on your decision to...27 Apr
It is a luxury to print with new fresh...14 Apr
Thank you for the responses to date. My...7 Apr
Hurray David We wish you success and...4 Apr