About Rubicon327

image: Rubicon327's picture
Recent content
TitleUpdated
Linotype lead Foil Stamping9 May 14
Letterpres Scam?4 Dec 13
Acme Typesetting Service3 Dec 10
Recent comments
TitleDate ↓
Or you could do this, and every so...20 Jul
Get your dimensions and then seek out...18 Jan
I personally would then say to them...31 Oct
jfitz, I just got in contact with...11 Jan
Most of the time I have found that the...11 Jan
One of the things my customers joke...15 Sep
I agree with Dennis. As much as I know...13 Sep
Or check with Dave Seat at Hot Metal...22 Aug
My 1st choice would be Whittenberg....29 Jul
Maybe this will work.......10 Jun
...10 Jun
I don't know if I am missing something...16 May
How about now..17 Mar
...17 Mar
There are 2 sizes that I know of and...17 Mar
Cheaters......they slide over the front...17 Mar
I am in Connecticut and have a KS 15 x...10 Feb
Just some info found doing a quick...26 Jan
I have had good luck with 17/18 tooth...4 Nov
What is the difference between % mats...17 Sep
Like Dick G said. All the make ready...10 Aug
Bar-Plate Dolphin Cutter10 Jul
How about this windmill on ebay for...26 Jun
I have what I guess is aluminum, brass...5 Jun
After seeing pics of the problem I...28 May
Jonsel, you are probably correct in...27 May
Did you forget to post pics of the...21 May
...28 Apr
I don't get much for big numbering runs...13 Apr
Your welcome! Sound like you got it...13 Apr
As far as the manual goes it...10 Apr
Probably a few dumb questions but here...9 Apr
Not knowing the exact area and what is...20 Mar
I am guessing you have seen this press...12 Feb
Throws off quite a bit of heat....maybe...28 Jan
Can't tell you anything about the door...8 Jan
Just another thought...15 Dec
Sometimes I have found that if you can...15 Dec
I have never really noticed much noise...2 Dec
Jim, Glad to hear that you have it...24 Nov