About Watne

image: Watne's picture
  • Member for 18 years 30 weeks.
  • Last access 6 years 40 weeks ago.
Recent content
TitleUpdated
Heidelberg central oiling question13 Jun 16
13x18 Heidelberg windmill - clack valve cam/roller3 Nov 14
Feed board dimensions for C&P25 Sep 09
Recent comments
Title ↑Date
Actually the lockout feature came in...13 Oct
Barker - bingo! That's how I do it....26 Nov
From a Letpress message from Hal...26 Sep
I also would recommend two hits if you...9 Nov
I usually run business cards two-up on...27 Sep
I would imagine any current grease...25 Oct
I would use only one left-hand pin....6 Feb
I've found that redoing the rubber in...28 Oct
I've had some luck using a hand plane...31 May
Most importantly, these threaded pins...15 Jun
Naphtha is the main ingredient in many...9 Nov
Nick, big thanks for this! Lots of info...31 Aug
Not sure of the total capacity, but it...4 Jun
The key issue to me is that the...21 Sep
There are two pairs of holes, towards...25 Jun
We use Mobilgear 600 XP150. It is a...2 Nov
Well, never mind! For the record, the...3 Nov
With some practice you can switch...27 Jun
You are looking for 19H suckers (flat...7 Dec