About dicharry

image: dicharry's picture
Recent content
TitleUpdated
Serious Gauge Pins10 Mar 11
Serious Gauge Pins10 Mar 11
Baltimore No. 11 Rollers Recast?2 Sep 09
Do You Use a Feedboard?18 Mar 09
Cutting Sticks18 Mar 09
Parts for NS and OS Pilots5 Sep 07
Paper Recommendations16 Jan 07
Recent comments
Title ↑Date
$2500 is a good price depending on the...19 Aug
-deleted-24 Jul
.918 inches19 Apr
1. There is technically no maximum...2 Dec
1. Yes but it's a nightmare. Getting a...24 Feb
1.5 hp will be fine. I'm guessing...11 May
10x15" Tiegel Platen (Windmill)...18 Mar
192919 Oct
29635 would have been manufactured in...6 Jul
3450 lbs. 20 Mar
50/50 lemon juice and vinegar to get...2 Nov
6.5x10 Pilot (Old and New) 7x11 Old...4 Oct
A 10x15 hand fed floor model platen and...26 Jan
A 1958 model is totally fine. It won't...28 May
A 1980 Windmill will be able to handle...22 Jan
A couple questions: 1. You mentioned...11 Jun
A few questions: How far do you have...15 Jul
A little under 36 inches wide and 1000...15 Aug
A serial number list for the Pilot...26 Apr
a. Use mineral spirits NOT lacquer...9 Feb
Aaron, What are you trying to...21 Dec
Aaron, You can figure anywhere...13 May
According to my information C70467 was...2 Nov
After a closer look I begin to wonder...28 Oct
Alan, Understood. I look forward to...20 May
All 10x15 NS presses would start with...30 Jun
Along the lines of what Winking Cat has...20 Aug
also check ebay as there is someone in...17 May
Also contact Advanced Roller...24 Feb
Also track down the contact info for...29 Jan
Also try your local machine shop. If...8 Nov
Also… David Hauser at Tarheel...2 Nov
Also… Make sure you have seen the...26 May
Also… Penske has good (but large)...9 Oct
Also… I'd keep the ink stored...22 Aug
Also… the parts list for the press...15 May
An Old Style C&P could be anywhere...25 Jun
And I think the 8x12 would be fine (at...30 Jan
And yes… the longer lever is not a...13 Dec
Andrea, Where are you located?...7 Jun