About kimaboe

image: kimaboe's picture
Recent content
TitleUpdated
Bought a SP-15, time to move it...7 Mar 15
Possible eBay scam.13 Dec 14
Heat-controller for tabletop foil-stamper?31 May 14
Unidentified part11 Jun 13
Picture request: Poco 0 table/inking surface...6 Jun 13
Ink-disc for Victor press.31 May 13
Pantograph on Ebay, with templates28 Nov 10
OLD Kelsey Press3 Nov 10
Recent comments
TitleDate ↓
Nothing wrong with going off the deep...10 Apr
I have to say, I was a bit sad to let...28 Feb
Pretty sure it is neither Golding...27 Feb
Maybe someone with free time on their...14 Feb
Fritz is the only direct supplier for a...12 Feb
I doubt there is a lot of experience on...11 Feb
Just because there aren't any visual...11 Feb
"Am I pushing the limits of polymer...13 Dec
"Be funny if the website goes bye...22 Nov
I've also modified old California cases...20 Nov
Try reuploading the photo with the...9 Nov
Lots of people support their families...18 Sep
Thanks for sharing, always worth...14 Sep
Don't build a platen press unless your...11 Sep
1000 iph on a table-top sounds...21 Aug
FWIW I moved 40 full- and 20 half-cases...12 Jul
Location is everything, if you are in...28 Jun
Can you pay for the Lettra using money...11 May
Temperature is the likely culprit. I...3 May
Given your budget and experience, I...25 Apr
If you use good quality plywood (i.e....16 Apr
If you cannot find a original chase for...16 Apr
Gailying and Todd, note the original...10 Apr
Hi Alexandre, there is definitely...9 Apr
In Norwegian, it is called...30 Mar
I haven't used plates from Lyme Bay...12 Mar
Inksprite, this thread is a little over...20 Feb
They look a bit like some pieces I got...17 Feb
That is a good looking space, not to...17 Feb
I assume you are talking about printing...14 Feb
Hi Alfonso, I moved from the states...13 Feb
Sounds like you have had quite a find...13 Feb
Personally, I don't believe for a...11 Feb
Some roller materials melt, it can be a...10 Feb
These *are* letterpress type. They...9 Feb
InkSprite, you are correct. The top...8 Feb
I would never put my business info on...8 Feb
I couldn't find a full alphabet...7 Feb
No printing events nearby where one...4 Feb
I'll simply assume it is difficult for...8 Jan