About Frank Underwood

Recent content

Title	Updated
Pay Pal	7 Nov 15

Recent comments

Title	Date ↓
At one time, I had an 8x12 in my garage...	14 Nov
Don't forget that the larger (GT) uses...	13 Nov
Is there any date on this press? Maybe...	22 Sep
Clues: look at the feet, for a pinmark...	25 Aug
Paste enough thicknesses of stock on...	22 Aug
They're just ordinary short brads. If...	22 Aug
I used to save un-routed blocks for...	21 Aug
It's normal for the follower to be...	18 Aug
The powdered resin causes the lock...	18 Aug
You shouldn't have a form much above...	18 Aug
There don't seem to be any bolt holes...	7 Aug
Offset ink almost always works on...	19 Jul
6x10 galleys were known as job galleys;...	5 Jul
Does this have a triangular nick? That...	24 Jun
Geoffrey: Exactly so! Frank.	13 Jun
On a traditional cylinder press, such...	10 Jun
Fascinating! We sold a 10"x15"...	7 Jun
Hooray!!! Hope you got all the...	31 May
...	25 May
Without seeing this press, it's hard to...	24 May
Brass rule would be better, because...	11 May
Vey interesting, Fritz. I always...	10 May
And, in addition, this press doesn't...	8 May
The clutch and brake are one thing; if...	2 May
I'd try another brand of opaque white....	30 Apr
It looks to me like it might be...	29 Apr
You do not say just what kind of press...	28 Apr
You do not say just what kind of press...	28 Apr
You do not state whether this is...	26 Apr
However, this is an enlarged copy in...	18 Apr
Probably two or three low areas on...	14 Apr
If in fact the impression is soft on...	8 Apr
And, in general, the packing should add...	7 Apr
They put taper pins in dry ice to...	7 Apr
Has this face a pinmark? If so, then...	5 Apr
If you know which way the driven pulley...	24 Mar
If you know which way the driven pulley...	24 Mar
We used to use a piece of oiled paper...	24 Mar
Right! Naval Jelly should not be...	19 Mar
Pretty strong vinegar! We have used...	19 Mar