About eric m

Recent content

Title	Updated
eliminating static electricity	11 Apr 09

Recent comments

Title	Date ↓
i have heard of some running a press...	23 Mar
great idea with the "score the roller....	15 Mar
1 hard hit, either a double sheet or...	4 Mar
"Re-Doing" the motor, can be a lot of...	4 Mar
Wow! that gear has met a violent end....	4 Mar
The dwell feature used to be very...	12 Nov
most foils will transfer within 165F-...	12 Nov
what size did you get? my belt is...	16 Jun
this part is called the gate lock. it...	14 Jun
you will want to take pump apart first....	11 Feb
are you using rubber suckers? if so the...	11 Feb
or, you can contact me. i will give you...	8 Feb
1) this is alot of welds. the weld in...	6 Feb
i just tape on a "blue steel" jacket....	5 Feb
yes	26 Jan
http://www.briarpress.org/24069 read...	25 Jan
run your ink first. i am taking into...	25 Jan
ya come ON! that's like saying you lost...	17 Sep
the stainless will not rust but it is...	10 Sep
this seems quite high to me. make sure...	10 Sep
a light coat of 77 on each half should...	16 Dec
well, the proper tool is bent like a...	28 Jul
do you have the proper wrench/tool for...	28 Jul
you could have several problems here....	21 Jul
possibly check that the gate lock is...	15 Jul
waterboard it till it copitulates...	27 Jun
A firm strike against any soft...	25 Jun
"well taken care of" usually includes a...	20 Jun
josh, i will have to agree with...	6 Jun
i am a lefty too. some how i have...	31 May
sure, it works. but the motor then...	19 May
your best bet is to score/crease last...	18 May
if all parts are there, look into...	12 May
what press is this? off the cuff try Mc...	5 May
get the correct size "roll" pin...	2 May
um... both... they both register well....	1 May
high speed challenge? just a guess, but...	30 Apr
check into "metal stitching"part...	26 Apr
nakai foil is rather expensive. CROWN...	22 Apr
your chases too wide? too narrow? too...	20 Apr