About dwallen

image: dwallen's picture
Recent content
TitleUpdated
Windmill is not level22 Jul 17
Hot foil options question5 Apr 17
Windmill - Lever(s) for register lay - worn out.5 Aug 16
Heidelberg Windmill - Paper Feeding19 Jul 16
Windmill 10x15 Rollers2 Jul 16
Windmill on a 3 Phase Static converter20 Jun 16
Help with Windmill Packing20 May 16
Inkjet Printed Film 22 Mar 16
Challenge 15MA vs 15MP15 Jan 14
Winfield Printing27 Oct 12
Recent comments
TitleDate ↓
The windmill is now spot on level. And...28 Jul
Hi 1crem1: I just wanted to add some...27 Jul
Thanks, through this thread and via...24 Jul
Yes it has central lube system. I do...24 Jul
Thanks for the heads up, I think this...23 Jul
Thanks for the suggestion. The building...22 Jul
The first thing I would check is the...2 Jul
I have had inking issues in the past...9 Jun
When I first acquired a windmill I...16 Mar
I have a 1904 8x12 old style with the...5 Mar
Hi - Just curious. Do you laminate them...25 Jan
Just to add to the description provided...19 Dec
I have run into spots like that...11 Dec
I have no experience with stainless...10 Dec
Looks to me like the packing is taped...20 Sep
I recently set up a windmill using a 3...16 Sep
Very nice piece. Well done.16 Sep
I should add that the above applies to...5 Sep
I use fine steel wool and press wash...5 Sep
I just want to follow up on this and...31 Aug
I will keep all these suggestions in...27 Aug
Thanks Mick, the key appears to fit...27 Aug
Ok, I think my research leads me to...26 Aug
Hey thanks, these are some great...26 Aug
Congratulations on your new hire Louie...25 Aug
Both the adjusting bolts have broken...6 Aug
After more research I have discovered...5 Aug
Here are a picture of the parts. I have...5 Aug
Oh...Sorry... I just looked at your...5 Aug
Don't give up on your cutter yet. When...5 Aug
Thanks for the advice Mike. I did not...24 Jul
Thanks for the comments and hints on...23 Jul
Just a follow up and report on this. I...23 Jul
Well, I tried the static converter. It...23 Jul
Thanks Mike. You said " It appears to...20 Jul
Thanks very much for that description...19 Jul
Thanks, yes I do have that adjustment...19 Jul
Try Fisher's Continental...12 Jul
Thanks everyone who added to this...8 Jul
I am hoping someone with experience...4 Jul