About harrildplaten

image: harrildplaten's picture
Recent content
TitleUpdated
Roller Specifications25 Jan 19
Cherokee Type1 Nov 17
Cherokee language type31 Dec 16
Converting a small offset press to letterpress22 Jul 07
Kobold Platen adjustments13 May 07
type case layouts13 Mar 07
Recent comments
TitleDate ↓
How about lock nuts placed on the...8 May
Absolutely delighted to hear your voice...10 Apr
Gillete razor blades were the basis for...10 Apr
I use an original treadle powered...22 Mar
and also if you saw odd numbers...20 Mar
Just in passing, put half-a-crown...20 Mar
Jusr for interest, there used to be a...11 Mar
Jusr for interest, there used to be a...11 Mar
Crisps used to come with little packets...8 Mar
Maybe four-five years ago there was a...8 Mar
Now in the past, to make a line block...7 Mar
In the UK, sets of these often in a...7 Mar
Need to raise the humidity?, strips of...6 Mar
When the late Bert Smith was doing his...6 Mar
Hi Frank, 'a lot of destruction' is an...4 Mar
When the lines run off both edges, the...4 Mar
It occurs to me that even in the 1840s...3 Mar
Poliphilus is all very well, but have...3 Mar
Further to the above, last firm that I...3 Mar
Mr Richardson at the old London School...3 Mar
Theres a real long bar at St Pancras...25 Feb
And like any of its generation, beware...25 Feb
I would first try your Heidelberg...25 Feb
Would you credit it, I believe I have...16 Feb
Hawthorn, Baker at Dunstable Uk (aka...16 Feb
I would add that, as you might have...13 Feb
Ask Bob Richardson at St Brides in...13 Feb
To be found in the comp rooms of many...13 Feb
Do I recall that there was a UK built...9 Feb
Further to Mick's last, I think I...3 Jan
I myself would remove the cutting blade...2 Jan
Surely the right question is to ask...27 Dec
In a City of London commercial house in...24 Dec
One cautionary note, I 'found' a...23 Nov
Dredging amongst the memories from way...21 Nov
If anyone wants to know about four-way...30 Oct
Adding to my last, I would observe that...30 Oct
I also came into contact with Monotype...30 Oct
You are right Mick, Mouldtype may have...30 Oct
There used to be a proper profession:...30 Oct