About madmaudepress

image: madmaudepress's picture
Recent content
Goes Certificates - $30 for 300030 Sep 10
Lowering a Windmill10 Aug 10
Photopolymer on the Rocks1 Aug 10
C&P Pilot Roller Specs12 Feb 10
Interesting article on printing 1960's literary...24 Jan 10
Windmill Safety - (Stickin' my hand in it.)24 Jun 09
Removing Vandercook 4 Feed Shelf18 Dec 08
Schwabe Die Cutter - Adjusting Stroke?6 Nov 08
Intern with Mad Maude Press 22 Sep 08
Lead Type and Cabinets27 Jul 08
Recent comments
TitleDate ↓
So many damned presses in...30 Mar
They sell that stuff at Wal Mart, too...29 Mar
Just had some rollers recovered with SI...25 Mar
I evaluated some of the Toray stuff and...25 Mar
Those are Bar Plate Low-Profile...25 Mar
I use them and they work well. I also...9 Mar
I was going to contact them after...7 Mar
I was running my 8x12 C&P with the...25 Feb
My damn pulley comes loose every so...12 Feb
Windmill! Of course. No question about...31 Jan
I started making one and luckily...30 Jan
We makeready under the envelope and...26 Jan
You could use it to make negs25 Jan
I just use butcher paper ob my...22 Jan
We tried some of the Legion Bamboo...10 Jan
I used 1.5" solid steel rods from the...6 Jan
In my experience die cutting cotton...8 Dec
I have one of those Kwikprints. The guy...4 Dec
We were using nastier solvents but have...7 Nov
I've got a nice hydraulic cutter but...6 Nov
My beast has 5/8" ID automotive heater...1 Nov
Oh boy. Are you sure this isn't how...28 Oct
I have two of these. They're handy for...13 Oct
I would avoid that space. We had a...9 Oct
Y'know, I really don't understand all...4 Oct
You can jack / leverage it up to place...6 Aug
I would definitely go for the slab. I...2 Aug
http://www.vansonink.com/ts_msds.aspx...1 Aug
Spinks Envirotech, Gans Soy-Plus. I've...1 Aug
I use the same half-moon technique as...27 Jul
Both print runs will take equal effort...24 Jul
I have a Kwik-Print foil machine that...21 Jul
Had a project like this once. Thought...24 Jun
I use Dotster for domain registration...23 Jun
I have tried Spinks Envirotech, and I...23 Jun
Makes sense. The guy who had it before...20 Jun
Thanks for the information! I feel bad...19 Jun
I agree that outputting film on a laser...19 Jun
Lokken - I actually have a pretty...19 Jun
Just found this on the CL. Looks...19 Jun